manual:miscellaneous
Differences
This shows you the differences between two versions of the page.
Both sides previous revisionPrevious revisionNext revision | Previous revisionNext revisionBoth sides next revision | ||
manual:miscellaneous [2017/01/31 03:43] – jf | manual:miscellaneous [2017/02/09 01:38] – jf | ||
---|---|---|---|
Line 9: | Line 9: | ||
**HUD Size** - If you have HUD activated, this setting allows for you to adjust the size of the HUD on the screen. | **HUD Size** - If you have HUD activated, this setting allows for you to adjust the size of the HUD on the screen. | ||
- | **HUD Horizon** - This setting toggles Off/On an additional horizon shown on the HUD | + | **HUD Horizon** - This setting toggles Off/On an additional horizon shown on the HUD. This setting acts like a compass. |
{{: | {{: | ||
+ | |||
+ | ==== Broadcasting Flight Information to a Secondary Device ==== | ||
+ | |||
+ | For those who wish to broadcast flight information onto a device such as an iPhone, iPad, Android device, or even another PC, you can enable and configure the settings shown below. These settings are accessible under Settings/ | ||
+ | |||
+ | {{: | ||
+ | |||
+ | In order for you to set this feature up to work, you must follow the below steps. **Note** - This feature requires the use of your LAN (Local Area Network) or Local Network, and a basic understanding of your local network. | ||
+ | |||
+ | **1.** First turn on this feature. Find **Broadcast Flight Info to IP Address** and switch the setting to **" | ||
+ | |||
+ | **2.** On your secondary device, download the free app **ForeFlight** or your preferred app that is capable of receiving flight data over an IP network (LAN or Home Network). **Note** - In this demo we will use ForeFlight on an iPad. | ||
+ | |||
+ | **3.** Set the **Broadcast IP Address** to your local IP address range, changing the last part to **255**. **Note** - If the local IP address of your PC is 192.168.2.212, | ||
+ | |||
+ | **4.** The **Broadcast Port should remain the default 49002** | ||
+ | |||
+ | **5** Insure that your secondary device is on the same local network as the PC that you are running Aerofly FS 2 on. | ||
+ | |||
+ | **6.** Set up your flight as you normally would. | ||
+ | |||
+ | **7.** Start the ForeFlight app (or your preferred app). To verify your connection is a success (ForeFlight) click on the bottom tab that says " | ||
+ | |||
+ | |||
+ | |||
+ | |||
+ |